EasyManua.ls Logo

HP Enterprise R1500 G4 UPS - Weights and Dimensions; Rear Panels

HP Enterprise R1500 G4 UPS
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 6
792518-001 Edition 2
ENGLISH
1. Overview
1.2 Weights and dimensions
H
W
D
Description Weights
(kg/lb.)
Dimensions (mm/inch)
D x W x H
HPE R1500 G4 NA
20 kg/44 lb. 554 x 437 x 43 mm/21.8 x 17.2 x 1.7 in.
HPE R1500 G4 JP/TWN
UPS
20 kg/44 lb. 554 x 437 x 43 mm/21.8 x 17.2 x 1.7 in.
HPE R1500 G4 INTL UPS
19.5 kg/43 lb. 554 x 437 x 43 mm/21.8 x 17.2 x 1.7 in.
1.3 Rear panels
HPE R1500 G4 NA UPS and HPE R1500 G4 JP/TWN UPS
2 1 48 73 9 6b5
6a
HPE R1500 G4 INTL UPS
6a
2 1 473 6b
5
8
Note: TheR/T1500G4has3programmableoutputloadsegments.These
aredefinedasGroup1,Group2,andPrimaryGroup.Theloadsegments/
groupscanbeconfiguredviasoftwareandtheunit’suserinterface.See
theHPEPPsoftwareortheUPSManagementCarddocumentationfor
adviceonconfigurationviasoftware;seetheUserInterfacesectionofthis
guideforadviceonconfigurationviathefrontpanel.LoadGroups1and
2canbeprogrammedtoswitchoff/onindependently.ThePrimaryLoad
Groupcontrolstheoutletsindicatedandwillinitiateaunitshutdown.The
PrimaryLoadGroupisintendedforthemostcriticalloads.
(1) USB communication port
(2) RS-232 communication port
(3) Slot for optional communica-
tion card
(4) Connector for ROO (Remote
On/Off) or RPO (Remote Power
Off)) control
(5) Outlets for connection of critical
equipment (Primary group)
(6a) Group 1: programmable outlets
for equipment connection
(6b) Group 2: programmable outlets
for equipment connection
(7) Attached 6 ft. input power cord
for AC power source
(8) LED indicating site wiring fault
alarm
(9) Ground screw
(1) USB communication port
(2) RS-232 communication port
(3) Slot for optional communication
card
(4) Connector for ROO (Remote On/
Off) or RPO (Remote Power Off)
control
(5) Outlets for connection
equipment (Primary group)
(6a) Group 1: programmable outlets
for equipment connection
(6b) Group 2: programmable outlets
for equipment connection
(7) Socket for connection to AC
power source
(8) Ground screw

Related product manuals