Need help?Do you have a question about the HP T1000 G3 and is the answer not in the manual?
General| Topology | Line Interactive |
|---|---|
| Input Voltage | 120V |
| Output Voltage | 120V |
| Interface | USB |
| Form Factor | Tower |
| Output Connections | 6 x NEMA 5-15R |
| Input Connection | NEMA 5-15P |
| Typical Backup Time at Half Load | 10 minutes |
| Typical Backup Time at Full Load | 3 minutes |
| Efficiency at Full Load | 95% |
| Typical Recharge Time | 8 hours |
| Efficiency | 95% |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
| Humidity | 0-95% non-condensing |
| Capacity | 1000 VA |
| Battery Type | Sealed Lead Acid |
| Frequency | 50/60Hz |
| Transfer Time | 4-8 ms |
| Warranty | 3-year limited warranty |
Provides FCC compliance information for Class B digital devices and operational requirements.
Details US FCC compliance rules and contact information for questions.
States compliance with Canadian Interference-Causing Equipment Regulations for Class B apparatus.
Lists EU Directives (Low Voltage, EMC) with which the product complies.
Lists key features and advantages of the UPS, including voltage regulation and battery management.
Provides critical instructions for safe installation and maintenance of the UPS and batteries.
Details how to check the UPS for shipping damage and file claims if necessary.
Guides users through connecting the UPS internal battery for proper operation.
Step-by-step instructions for setting up and connecting the UPS to power and equipment.
Illustrates and labels the ports and connectors on the rear of the UPS units.
Explains how to power on the UPS and what to expect upon startup.
Details the procedure for starting the UPS using battery power when utility power is absent.
Provides instructions on how to safely shut down the UPS and connected equipment.
Explains the UPS's standby mode, indicators, and power availability.
Identifies and explains the controls and indicators on the UPS front panel.
Guides users on how to perform a self-test to check battery and UPS functionality.
Explains how to use DIP switches to set the UPS output voltage and input voltage range.
Covers the USB and serial ports available for UPS monitoring and management.
Explains serial port connection for UPS data exchange and management.
Describes the function of the network protector for safeguarding communication lines.
Outlines the features and benefits of the HP Power Manager software for UPS management.
Provides guidelines for maintaining the UPS unit and its batteries for optimal performance.
Details the necessary steps for safely transporting the UPS, including battery disconnection.
Offers recommendations for storing the UPS and batteries properly to maintain their condition.
Lists available spare battery modules and UPS units with their part numbers.
Provides detailed instructions on how to safely replace the internal UPS batteries.
Explains the procedure for testing new batteries after installation to ensure proper function.
Offers guidance on the proper and safe disposal and recycling of used UPS units and batteries.
Provides a list of the UPS models covered in the manual, including their part numbers.
Lists the physical dimensions and weights for different UPS models.
Details the electrical specifications for input voltage, frequency, and connections.
Outlines the electrical output specifications, including power levels, voltage, and receptacles.
Provides details on the UPS battery configuration, voltage, type, and charging.
Lists environmental operating conditions and safety certifications for the UPS.
Explains audible alarms and front panel indicators to help diagnose UPS issues.
Provides instructions on how to temporarily silence audible alarms for existing faults.
Describes the site wiring fault indicator and its meaning for specific models.
A table listing common UPS alarms, possible causes, and recommended actions for resolution.
Information on how to contact HP for technical assistance and what details to provide.
Lists essential information to have ready before contacting HP support for faster service.
Provides contact details for HP authorized resellers and technical support.
Outlines the standard 3-year limited warranty provided for the UPS features.
Explains the terms and conditions for the $250,000 computer load protection guarantee.
Details the warranty that covers battery replacement before actual failure based on software notifications.
To Next Page
