HP R/T3000 G2 User Manual

Installation 35
Installing the ERM as a tower
Before installing the unit, review and adhere to all warnings provided in "Precautions (on page 13)."
The tower stands and associated hardware ship with the UPS.
Rotating the logo badge
Gently pull out the logo badge, rotate it 90 degrees, and then replace it in the bezel.
Attaching the ERM front bezel
Attaching the tower conversion stands

HP R/T3000 G2 Specifications

General

Power Rating	3000VA/2700W
Rack Size	2U
Frequency	50/60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-15°C to 45°C
Form Factor	Rack-mountable/Tower
Battery Type	Sealed lead-acid (SLA)
Battery Recharge Time	3 hours
Transfer Time	4-6 ms
Humidity	0-95% non-condensing
Communication Interface	USB, Serial
Warranty	3 years