HP t620 PLUS User Manual

Mounting the thin client
HP t620 Thin Client: HP recommends mounting the thin client in the vertical (tower) orientation, with
the HP logo right-side up. Mounting in other orientations may result in decreased performance under
certain conditions; operating the computer with limited power to prevent overheating is one such
condition. When the integrated fiber NIC is installed in the standard chassis and the chassis is
mounted in the horizontal orientation, the maximum ambient temperature for device operation is
reduced to 35°C (95°F).
HP t620 PLUS Thin Client: There is no orientation limitation for PLUS configurations. However,
optimal performance will be obtained in the vertical (tower) orientation.
This thin client incorporates four mounting points on the right side of the unit. These mounting points
follow the VESA (Video Electronics Standards Association) standard, which provides industry-
standard mounting interfaces for Flat Displays (FDs), such as flat-panel monitors, flat displays, and
flat TVs. The HP Quick Release connects to the VESA-standard mounting points, allowing you to
mount the thin client in a variety of orientations.
NOTE: When mounting to a thin client, use the 15 mm screws supplied with the HP Quick Release.
To use the HP Quick Release:
1. Remove four screws from the right side of the computer.
28 Chapter 2 Hardware changes

HP t620 PLUS Specifications

General

L2 cache	2 MB
Processor cores	4
Processor model	GX-420CA
Processor family	AMD G
Motherboard chipset	-
Processor frequency	2 GHz
Storage media	SSD
Card reader integrated	No
Total storage capacity	16 GB
Storage drive interface	mSATA
Internal memory	4 GB
Memory clock speed	1600 MHz
Internal memory type	DDR3L-SDRAM
Discrete graphics card model	AMD FirePro 2270
On-board graphics card model	AMD Radeon HD 8400E
Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
USB 2.0 ports quantity	6
Ethernet LAN (RJ-45) ports	1
VGA (D-Sub) ports quantity	0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	2
Operating system installed	ThinPro
Operating system architecture	32-bit
Product color	Black
Power supply	85 W
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Sustainability certificates	ENERGY STAR
Country of origin	China

Weight and Dimensions

Depth	65 mm
Width	220 mm
Height	240 mm
Weight	2040 g