C Thin client operation
CAUTION: Ensure that the write filter is enabled after committing necessary configurations to the
thin client flash drive. During normal operation of the thin client, the write filter must be enabled. Also
ensure that Page File is not enabled on thin clients with flash memory storage. Failure to follow these
required actions can void the warranty of the flash storage device. In the event of damage to the flash
storage device due to operation with a disabled write filter or enabled Page File, the damage will not
be covered by HP warranty.
For more information about write filter usage, see the operating system guide for your thin client
available at
http://www.hp.com/support/manuals/thinclients.
Routine thin client care
Use the following information to properly care for your thin client:
●
Never operate the thin client with the outside panel removed.
●
Keep the thin client away from excessive moisture, direct sunlight, and extreme heat and cold.
For information about the recommended temperature and humidity ranges for the thin client, see
Specifications on page 32.
●
Keep liquids away from the thin client and keyboard.
●
Turn off the thin client and wipe the exterior with a soft, damp cloth as needed. Using cleaning
products may discolor or damage the finish.
38 Appendix C Thin client operation
To Next Page
Loading...
Need help?
General
Weight and Dimensions
