HP TACL User Manual

Using SPI
Using Programmatic Interfaces
107365 Tandem Computers Incorporated 7–7
Table 7-2. SPI Token Data Types (Page 2 of 2)
Token Data Type Name Value Type and Range
ZSPI^TDT^SSCTL 0 to 255
ZSPI^TDT^SSID Subsystem owner, period, subsystem number, period, and version
number.
ZSPI^TDT^STRUCT Must be put into, or obtained from, a STRUCT. Definition of the
STRUCT provides rules for conversion between internal and external
formats.
ZSPI^TDT^SUBVOL Any valid subvolume name; missing fields are not defaulted. Systems
whose numbers cannot be found are given number 255 on input;
system number 255 is shown as \?? on output.
ZSPI^TDT^TIMESTAMP -(2**63) to +(2**63)-1
ZSPI^TDT^TOKENCODE -2147483648 to +2147483647. On input, a 32-bit STRUCT can be
used.
ZSPI^TDT^TRANSID A TMF transaction identifier formatted as follows:
\ system-name ( crash-count ). cpu . sequence
If the internal-format trans-id contains a crash count of zero, the
transaction ID is formatted as follows:
\ system-name . cpu . sequence
In either case, if the system is not named, the transaction ID is
formatted as follows:
cpu . sequence
If the name of a system cannot be found on output, system-name
is replaced by system-number .
ZSPI^TDT^UINT 0 to 65535
ZSPI^TDT^USERNAME Any valid user name; a user number cannot be used.
TACL interprets an unknown token data type as if the data type were ZSPI^TDT^INT.
Variable-Length Data Items
In TACL, the byte length appears before the data, separated from it by a space.

HP TACL Specifications

General

Brand	HP
Model	TACL
Category	Software
Language	English