HP TACL - SET Summary

#SET Summary
Syntax Summary
9–16 107365 Tandem Computers Incorporated
#SET Summary The following summarizes the syntax of the #SET function when it is used to assign
values to built-in variables. SET VARIABLE commands used for the same purpose
have the same syntax.
#SET #ASSIGN [ [ / option [ , option ] … / ] logical-unit ]
#SET #BREAKMODE { DISABLE | ENABLE | POSTPONE }
#SET #CHARACTERRULES file-name
#SET #DEFAULTS subvolume-name
#SET #DEFINEMODE { OFF | ON }
#SET #ERRORNUMBERS n n n n
#SET #EXIT num
#SET #HELPKEY [ key-name ]
#SET #HIGHPIN { OFF | ON }
#SET #HOME directory
#SET #IN file-name
#SET #INFORMAT { PLAIN | QUOTED | TACL }
#SET #INLINEECHO num
#SET #INLINEOUT num
#SET #INLINEPREFIX [ prefix ]
#SET #INLINETO [ variable-level ]
#SET #INPUTEOF num
#SET #INSPECT { OFF | ON | SAVEABEND }
#SET #MYTERM home-term
#SET #OUT file-name
#SET #OUTFORMAT { PLAIN | PRETTY | TACL }
#SET #PARAM [ param-name [ param-value ] ]
#SET #PMSEARCHLIST searchlist
#SET #PMSG num
#SET #PREFIX [ text ]
#SET #PROCESSFILESECURITY " security "
#SET #PROMPT num
#SET #REPLYPREFIX [ num ]
#SET #SHIFTDEFAULT { DOWN | NOOP | UP }
#SET #TACLSECURITY " security "
#SET #TRACE num
#SET #USELIST [ directory-name [ directory-name ] … ]