HP V241p User Manual

10
button. The factory default setting is
“30 seconds”.
Management
To select the function of power
management for your monitor.
Auto-Sleep Mode
To enable the energy-saving
function, Select
On
off
The factory default setting is On.
Power Saver Mode
The “Power Saver Mode”control
allow quick user selection of
reduced power modes while the
monitor is still in use.Select:
Off
10% Savings
20% Savings
30% Savings
40% Savings
50%Savings
The factory default setting is On.
Power-On Recall
Restores power to the monitor
following an unexpected removal of
power. Select:
On
Off
The factory default is On.
Mode Display
The resolution, refresh rate and
frequency information will be
displayed when the OSD main
menu is accessed. Please select
“On” or “Off” as the factory default
on-off setting.
Monitor Status
The operational status of your
monitor will be displayed when you
power on your monitor. To select
the positions where the status
information is displayed:
Top
Middle
Bottom
Off
The factory default setting is “Top”
DDC/CI support
Controlling some OSD menu
functions, such as brightness,

HP V241p Specifications

General

Brand	HP
Model	V241p
Category	Monitor
Language	English