HP V241p User Manual

11
contrast and color temperature, on
your computer is allowed.
This feature can be set as “On” or
“Off”. The factory default setting is
On.
Bezel Power LED
Power on/off the indicator (LED) on
the power button. If the indicator is
set as “Off”, it will be off all the time.
Audio(For V241a
only)
1. To adjust the volume level of the
speaker. The factory default
range is 90.
2. Speaker Self-Test : There shall
also be a provision made for an
internal audio test.
Sleep timer
The following timer adjustment
menu options are available:
Set current time – to set the current
time in hours and minutes.
Set sleep time – to set the desired
time when your monitor works
under the sleeping mode.
Set On time – to set the desired
time when your monitor is
awakened from the sleeping mode.
Timer - Set “On’ or “Off” status for
the Sleep Timer. The default setting
is “Off”.
Sleep Now – to activate the sleep
mode for your monitor
Language
Selects the language in which the
OSD menu is displayed.The factory
default is English.
Information
To select and display important
information about your monitor.
Factory Reset
The factory default settings will be
reset
Input Control
When the monitor is connected to
two active and valid video sources,
switching between the video input
source is available. Switching the

HP V241p Specifications

General

Brand	HP
Model	V241p
Category	Monitor
Language	English