EasyManua.ls Logo

HP Vectra VEi8 - Vectra VEi 8 Specifications; Physical Characteristics of Vectra VEi 8; Electrical Specifications for Vectra VEi 8

HP Vectra VEi8
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
1 System Overview
Specifications
Specifications
Physical Characteristics
Electrical Specifications
Any attempt to draw too much current (such as a short circuit across
edge-connector pins, or an accessory board that is not suitable for
these PCs), will cause the overload protection in the power supply to
be triggered, and the PC could fail to boot. To get out of the power
supply protection mode, remove the power cord, wait for 10 seconds,
then replace the cord.
Characteristic Description
Weight
(excluding display and keyboard)
8.7 kg (19 pounds)
Dimensions Width: 41.8 cm (16.5 inches)
Height: 14.0 cm (5.5 inches)
Depth: 37.5cm (14.8 inches)
Footprint 0.157 m
2
(1.68 ft
2
)
HP Windows 95 Keyboard 18.3 (W) by 7 inches (D) by 1.3 inches (H), when flat, or
18.3 (W) by 7 inches (D) by 2 inches (H), when standing
(46.4 cm x 17.8 cm x 3.3 cm [5.1 cm])
Typical Power Consumption/Availability for ISA Accessory Slots
+5 V 4.5A limit per slot (limited by system board)
+12 V 1.5A limit per slot (limited by system board)
-12 V 0.3A total power limit (limited by power supply)
Typical Power Consumption/Availability for PCI Accessory Slots
+5 V 4.5A maximum per slot
+12 V 0.5A maximum per slot
-12 V 0.1A maximum per slot

Other manuals for HP Vectra VEi8

Related product manuals