HP XP P9500 User Manual (English)

Other manuals for HP XP P9500

Software User's Guide608 pages

Owner's Guide104 pages

Configuration Guide95 pages

Reference Guide395 pages

Manual348 pages

Operation Guide43 pages

User Guide193 pages

Questions and Answers:

X
xfloresAug 27, 2025
What does HP Software 'Logical Blockade' mean and how to fix it?
- R
  Ronald MoyerAug 27, 2025
  A 'Logical Blockade' in HP Software indicates a failure at a primary or secondary system port, in the path relay equipment, or a broken connection cable. If the failure is at a primary system port, repair the port status on the primary system. If the failure is at a secondary system port, repair the port status on the secondary system, then delete the path and add the path and the secondary system back again. If the failure is in the path relay equipment, repair the path relay equipment, then delete the path and add the path and the secondary system back. If the connection cable is physically broken, replace the broken cable, then delete the path and add the path and the secondary system again.
L
Linda SimsAug 27, 2025
What does HP XP P9500 'This path was not established' mean?
- M
  Mario MuellerAug 27, 2025
  The message 'This path was not established' in HP Software indicates that the specified path has not been successfully created or configured. Delete the failed path. You may need to change the minimum paths setting or delete the secondary system in order to delete the path. After deletion finishes, add the path and the secondary system by using the Add Path or Add DKC command.
C
Charles GutierrezAug 27, 2025
What does HP Software 'Secondary Data Volume Failure' mean?
- M
  Michelle CollinsAug 27, 2025
  The message 'Secondary Data Volume Failure' in HP Software means that the primary system detected an error during communication with the secondary system or detected an I/O error during update copy. Clear any error conditions at the secondary system and the S-VOL. If you need to access the S-VOL, release the pair from the secondary system. If data in the S-VOL has been changed, release the pair from the primary system and then re-create the pair. If data in the S-VOL has not been changed, restore the pair from the primary storage system.
R
robert16Aug 27, 2025
What to do if HP XP P9500 shows 'Communication error'?
- S
  Stephanie BaileyAug 27, 2025
  A timeout error has occurred in the path between the primary and secondary systems. Delete the failed path and retry.
A
Amanda DennisAug 28, 2025
What happens to HP XP P9500 Software Cnt Ac-J Z pairs during a planned power outage?
- K
  Kristen BishopAug 28, 2025
  During a planned power outage to the primary system, the Cnt Ac-J Z pairs are temporarily suspended. No recovery procedure is required. The primary system automatically removes the suspension condition when the system is powered on.
M
morenokimberlyAug 28, 2025
What to do if the status of pairs and/or logical paths is not displayed correctly in HP XP P9500?
- N
  Nicholas YoungAug 29, 2025
  Make sure that the correct CU image is selected. Check whether you selected correct items or options in Cnt Ac-J windows, such as the DKC Operation window, the Pair Operation window, and the Display Filter dialog box.
R
Robert JohnsonAug 25, 2025
What to do if HP XP P9500 Software Business Copy error message is displayed?
- S
  Stefanie StephensAug 25, 2025
  If a Business Copy error message appears on the Remote Web Console during an operation, select the failed volume in the Preview List on the Pair Operation window. Right-click to display the menu, and then click Error Detail. Consult the HP P9000 Remote Web Console Messages for a list of error codes and corrective actions.
K
Kristopher PaceAug 29, 2025
Why is HP XP P9500 Software monitoring data not updating?
- M
  morrisnicholasAug 29, 2025
  If the HP Software monitoring data isn't updating, even with the Monitoring Switch enabled, disable the Monitoring Switch and then re-enable it again. This may be due to a change in the time setting of SVP. For more information on Monitoring Switch, see the HP P9000 Performance for Open and Mainframe Systems User Guide.
S
Sherry MontgomeryAug 29, 2025
What to do if HP XP P9500 Software main system detects error at remote system?
- C
  Colleen PattonAug 30, 2025
  If the main system detected an error condition at the remote system, which caused the main system to suspend the pair and the R-VOL suspend type is R-VOL Failure, clear the error condition at the remote system or R-VOL, then resynchronize the pair from the main system. If you need to access the R-VOL to clear the error conditions, release the pair from the remote system. After you clear the error conditions from R-VOL, restart the pair.
E
Edward RussellAug 30, 2025
What causes HP Software Communication Time Out?
- C
  Christina BrowningAug 30, 2025
  If communication between the main and remote HP Software system timed out, ensure the remote system is powered on and fully functional, including NVS and cache. Verify that data path hardware is properly configured and functional, including cables, connectors, switches, extender devices, and communication lines. Delete the failed path; you may need to adjust the minimum paths setting or delete the remote system to do so. Then, add the path or remote system using Edit Path or Add RCU.