NVIDIA Quadro FX5800 Graphics Card
installation
Introduction
This document describes how to install an NVIDIA Quadro FX5800 Graphics Card with an auxiliary
power adapter cable in an HP Workstation.
Kit contents
●
NVIDIA Quadro FX5800 Graphics Card
●
Auxiliary power adapter cable
●
Card support bracket for HP xw8600 and xw9400 Workstations
●
Fan for HP xw8600 Workstation
●
Warranty information
Before you begin
To determine the compatibility of this product with your HP workstation, see QuickSpecs online at
http://www.hp.com/go/productbulletin.
Before installing an NVIDIA FX5800 Quadro graphics card, ensure the following criteria are met:
●
HP
800 Workstations must contain an 1110 Watt power supply.
●
HP xw8600 and xw9400 Workstations must contain a 1050 Watt power supply for dual cards. (1050
Watt power supply is recommended for single card.)
●
System memory cannot exceed 32 GB with dual FX5800 cards (HP xw8600 Workstations).
●
System cannot contain Dual FSB1600/ Quad core processors with dual FX5800 cards (HP xw8600
Workstations).
© 2008–2009 Hewlett-Packard Development Company, L.P.
Printed in the U.S.
ENWW Introduction 1
To Next Page
Need help?
General