20
a) Username & Password
Default Setting : Enabled
Recommended Setting : Enabled
Select Enabled.
This option allows users and passwords to be added from the
WebGUI. If it is disabled, then only the administrator has MEBx
remote access.
b) SOL.
Default Setting : Enabled
Recommended Setting : Enabled
Select Enabled.
This option enables / disables Serial Over LAN (SOL) functionality.
c) IDE Redirection
Default Setting : Enabled
Recommended Setting : Enabled
Select Enabled.
This option enables / disables IDE Redirection (IDE-R) functionality.
d) Legacy Redirection Mode.
Default Setting : Disabled
Recommended Setting : Disabled
Select Disabled.
This option allows the Redirection feature to work with the pre-AMT 6.0
remote consoles.
c. KVM Configuration.
Default Setting : Disabled
Recommended Setting : User Dependent
To Next Page
Loading...
Need help?
General