24
Fig ure 16: Intel AMT WebGUI Screen
6) Review system information and/or make any necessary changes.
Important Note:
The MEBx password can be changed for the remote system in the WebGUI.
Changing the password in the WebGUI or a remote console will result in two
passwords. The new password, known as the “remote” MEBx password, will only
work remotely with the WebGUI or remote console. The local MEBx password
used to access the MEBx locally will not be changed! The user will have to keep
track of both local and remote MEBx passwords to be able to access the system
MEBx locally and remotely.
When the MEBx password is initially set in AMT Setup, it serves as both the local
and remote password. They are in sync. If the remote password is changed, then
the passwords are out of sync.
The remote MEBx password must also follow the criteria defined in the Password
Guideline section for a strong password.
7) Exit.
To Next Page
Loading...
Need help?
General