System Board
System Board Form
Factor
BTX 21.2mm x 26.7mm
Processor Socket
Single LGA 1155
CPU Bus Speed
DMI
Chipset
Intel® PCH C206
Memory Expansion Slots
4 DDR3 memory slots
Memory Type Supported
DDR3, UDIMM (Unbuffered), ECC & non-ECC
Memory Modes
Non-Interleaved for single channel. Interleaved when both channels are populated.
Memory Speed Supported
1333MHz DDR3
Memory Protection
ECC available on data.
Maximum Memory
16GB
MEMORY LOADING CONFIGURATIONS
Memory Configuration
(Supported)
1GB, 2GB and 4GB ECC and non-ECC unbuffered DIMMs are supported, but not if mixed.
NOTE:
* Maximum memory capacities assume 64-bit operating systems, such as genuine Genuine
Windows® 7 Professional 64-Bit, Genuine Windows® 7 Professional 64-bit Downgrade to Genuine
Microsoft® Windows® XP Professional 64-bitRed Hat Linux 64-bit. Genuine Windows Vista Home 32 and XP
Professional (32-bit) support up to 4 GB. 32-bit Linux supports up to 8 GB.
PCI Express Connectors
1 PCI Express Gen2 x16 LP slot (x16 electrical/x16 mechanical)
1 PCI Express Gen2 x16 LP slot (x4 electrical/x16 mechanical)
1 PCI Express Gen2 x1 LP slot (x1 electrical/x1 mechanical)
NOTE:
LP = low profile
NOTES:
In the PCIe x16 (x16 electrical/x16 mechanical) Gen 2 slot, if it is not being used for a graphics card,
only cards certified as After Market Options for this platform are supported.
PCI Connectors
(5.0V)
1 PCI LP slot
Supported Drive
Interfaces
SATA
Integrated (4) Serial ATA interfaces (2x 6Gb/s SATA in blue, 2x 3Gb/s SATA in
black). One port can optionally be used for eSATA.
NOTE:
the Z210 SFF
supports a maximum of two SATA/SSD drives only. RAID 0 and 1 supported.
QuickSpecs
HP Z210 SFF Workstation
System Technical Specifications
DA - 13873 Worldwide — Version 26 — October 4, 2013
Page 13
To Next Page
Loading...
