HP Z210 SFF - Technical Specifications - Hard Drives; SATA Hard Drives

SATA (Serial ATA) Hard
Drives for HP
Workstations
600GB SATA 10K rpm SFF
in 3.5" Frame HDD
Capacity 600GB
Height 1 in; 2.54 cm
Width Media Diameter 2.5 in; 6.36 cm
Physical Size 4 in; 10.17 cm
Interface Serial ATA (3.0Gb/s)
Synchronous Transfer
Rate (Maximum)
Up to 300MB/s
Buffer 32MB
Cache Segmentable
Seek Time (typical reads,
includes controller
overhead, including
settling)
Single Track 0.4 ms (max)
Average 3.6 ms
Full Stroke 9.0 ms
Rotational Speed 10,000 rpm
Logical Blocks 1,172,123,568
Operating Temperature 41° to 131° F (5° to 55° C)
300GB SATA 10K rpm SFF
in 3.5" Frame HDD
Capacity 300,069,052,416 bytes
Height 1 in; 2.54 cm
Width Media Diameter 2.5 in; 6.36 cm
Physical Size 4 in; 10.17 cm
Interface Serial ATA (3.0 Gb/s), Native Command Queuing
enabled
Synchronous Transfer
Rate (Maximum)
Up to 300 MB/s
Cache 16 MB
Seek Time (typical reads,
includes controller
overhead, including
settling)
Single Track 0.7 ms (maximum)
Average 4.4 ms
Full Stroke 9.5 ms
Rotational Speed 10,000 rpm
Logical Blocks 586,072,368
Operating Temperature 41° to 131° F (5° to 55° C)
160GB SATA 10K rpm SFF
in 3.5" Frame HDD
Capacity 160,041,885,696 bytes
Height 1 in; 2.54 cm
Width Media Diameter 2.5 in; 6.36 cm
Physical Size 4 in; 10.17 cm
Interface Serial ATA (1.5 Gb/s), Native Command Queuing
enabled
QuickSpecs
HP Z210 SFF Workstation
Technical Specifications - Hard Drives
DA - 13873 Worldwide — Version 26 — October 4, 2013 Page 30