• Select Continue.
NOTE If you would like to use a longer drying time, you can ask the HP Color Center to create
the test chart without going on to create a profile (Select only Print ICC profiling chart).
Then, later, when the chart is completely dry, you can restart the HP Color Center and ask it to
create a profile using the test chart you have already created (Select only Scan ICC profiling
chart and create ICC profile).
In this case the spectrophotometer takes a while to warm up before it is ready to scan.
Choose ICC Profile Settings >
The ICC profile will be created and installed with the specified name and settings.
5
To Next Page
Loading...
