HP Z27s - Technical Specifications; Panel and Display Performance; User Controls and Interface Options

QuickSpecs
HP Z27s 27-inch IPS UHD Display
Technical Specifications
c04557329 —DA 15209—Worldwide — Version 4 — June 06, 2016
Page 3
Models: J3G07A4
Panel
Type
27-inch IPS w/LED backlight
Viewable Image Area
(diagonal)
68,4 cm (26.9-inch) widescreen; diagonally measured
Panel Active Area
(W × H)
59,62 x 33,53 cm (23.47 × 13.2 in)
Resolution
3840 x 2160 @ 60 Hz (UHD)
Aspect Ratio
16:9
Viewing Angle
Up to 178° horizontal/178° vertical typical
Brightness
300 cd/m
2
Contrast Ratio (Typical)
1000:1 Static; 5,000,000:1 Dynamic (DCR)
Response Times*
6 ms typical (G-to-G) with Overdrive
Pixel Pitch
155.25 um
Pixels Per Inch (PPI)
163 DPI
Backlight Lamp Life
(to half brightness)
30,000 hours minimum
Color Production
10-bit (1.07 B)
Color Gamut (Typical)
100% sRGB
* Performance specifications represent the typical specifications provided by HP's component
manufacturers; actual performance may vary either higher or lower.
User Controls
Buttons or Switches
Menu, 4-button OSD and Power
Languages
10 (English, Spanish, German, French, Italian, Netherlands,
Portuguese, Japanese, T-Chinese and S-Chinese)
On Screen Display
(OSD) User Controls
Brightness, Contrast, Color, Image Control, OSD control, Management,
Language, Information, Factory Reset, Input Control
Audio Controls
N/A
Signal
Interface/
Performance
Horizontal Frequency
30–135 kHz
Vertical Frequency
24-60 Hz
Native Resolution
3840 x 2160 @ 60 Hz (UHD)
NOTE: The video card must be capable of supporting 3840 × 2160 –
60Hz to drive the monitor at the Preferred Mode.
Preset Graphic Modes
(non-interlaced)
640 x 480 @ 60Hz
720 x 400 @ 70 Hz
800 x 600 @ 60 Hz
1024 x 768 @ 60 Hz