HPE 8325 Series

Page 4
Power supply instructions
Table 2: Safety and regulatory information for Aruba 8325 switch models
Safety-EU EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011+A2:2013
Safety-Worldwide IEC60950-1:2005 Ed.2; Am 1:2009+A2:2013
North American UL60950-1, CSA 22.2 No 60950-1
Lasers EN60825-1:2014 / IEC 60825-1: 2014 Class 1
Class 1 Laser Products / Laser Klasse 1
EMC EN 55032:2012, Class A
EN 55024:2010
EN 61000-3-2:2014, Class A
EN 61000-3-3:2013
FCC CFR 47 Part 15:2010, Class A
VCCI 32 Class A
CNS 13438
RoHS EN 50581:2012
NOTE: Environmental and other switch specifications, such as acoustics data, are included in the Aruba 8325
Switches Installation and Getting Started Guide. To access the latest edition of this guide, use the URL and
instructions included under All product documentation
on page 1.
Table 3: Japan power cord warning
Japan Power Cord
Warning
WARNING: During the installation, ensure that AC power is NOT connected to the Power Supply.
CAUTION: Shock hazard
To completely remove power from the switch, disconnect all power
cords.
Interior Wiring
Warning
WARNING
FOR INDOOR USE ONLY. The switch, AC power cord or adapter, and all connected cables are not designed for outdoor use.