Need help?Do you have a question about the HPE Aruba 2930F and is the answer not in the manual?
General| Model | HPE Aruba 2930F |
|---|---|
| Switching Capacity | Up to 176 Gbps |
| Input Voltage | 100-240 VAC |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| AC Power Input | 100-240VAC, 50/60Hz |
| Warranty | Limited Lifetime Warranty |
| Uplink Ports | 4 x SFP+ |
| Management | Web GUI, CLI, SNMP |
| Layer | Layer 3 |
| Memory and Processor | ARM Cortex A9 @ 1016 MHz, 1 GB DDR3 SDRAM, 4.5 MB packet buffer |
| VLAN Support | Yes, up to 4094 VLANs |
| Jumbo Frames | Up to 9220 bytes |
| DC Power Input | Not supported |
| Power Consumption | Varies by model |
| Power over Ethernet (PoE) | IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) available on some models |
Instructions for mounting the Aruba 2930F switch in a two-post rack using included brackets.
Procedure for attaching self-adhesive pads and placing the switch on a stable surface.
Guidelines for wall or under-table installation, including ventilation and bracket attachment.
Emphasizes the use of genuine HPE Aruba transceivers for optimal performance and reliability.
Explains the process and considerations for replacing SFP/SFP+ transceivers while the switch is powered on.
Details the importance of matching speed/duplex settings for SFP/SFP+ port connections.
Provides information on obtaining the latest software version and documentation.
Details environmental, safety, and regulatory specifications for the Aruba 2930F switch.
Regulatory statement for Japan regarding EMC Class A information technology equipment.
Regulatory statement for Korea regarding EMC Class A information technology equipment.
Information regarding the EAC conformity mark for Russia/Belarus/Kazakhstan/CEE.
To Next Page