EasyManua.ls Logo

HPE Aruba Networking CX 6200 Series

HPE Aruba Networking CX 6200 Series
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HPE Aruba Networking CX
6200F/M Switch Series
Installation and Getting
Started Guide
Published: June 2023
Edition: 1

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the HPE Aruba Networking CX 6200 Series and is the answer not in the manual?

HPE Aruba Networking CX 6200 Series Specifications

General IconGeneral
SeriesCX 6200
Product SeriesAruba CX 6200
Operating temperature0°C to 45°C (32°F to 113°F)
Operating Humidity10% to 90% non-condensing
Port Density24, 48
Ports24 or 48
SFP Ports4 SFP/SFP+
Switching Capacity176 Gbps
Layer SupportLayer 3
ManagementCLI, Web GUI, SNMP
Operating SystemAruba CX
SoftwareArubaOS CX

Summary

About This Document

Applicable Products

Lists all supported switch models and their SKUs, categorized by TAA compliance.

Related Publications

Lists other documentation and guides relevant to the switch series.

Introducing the Switches

Switch Components Overview

Describes the front and back panel components of the 6200F/M switch series.

Network Ports and Specifications

Details the different network port types, speeds, and capacities for various models.

Switch and Port LEDs

Explains the function and behavior of the LEDs on the switch front panel.

Management and Reset Features

Covers LED mode select buttons, reset buttons, and the out-of-band management port.

Installing the Switch

Included Parts and Installation Procedures

Lists package contents and provides a step-by-step guide for switch installation.

Installation Precautions and Guidelines

Details safety warnings and best practices to follow during switch installation.

Verifying Boot and Powering On

Explains how to check if the switch initializes correctly after power connection.

Mounting the Switch

Covers different mounting options: tabletop, two-post rack, and four-post rack.

Connecting Cables and Transceivers

Guides on connecting network cables and installing optional SFP/SFP+ transceivers.

Switch Configuration and Troubleshooting

Initial Switch Configuration

Provides steps for basic setup, assigning IP addresses, and minimal configuration.

Replacing Components

Step-by-step instructions for replacing fans and power supply units.

Troubleshooting Common Issues

Offers tips for diagnosing problems using LEDs, console messages, and hardware tests.

Restoring Factory Default Configuration

Explains the process to reset the switch to its original factory default settings.

Technical Specifications

Physical and Environmental Information

Details switch dimensions, weight, and operating environmental conditions.

Electrical and Acoustic Specifications

Provides electrical requirements, power ratings, and sound level data.

Safety and Regulatory Compliance

Information on safety standards, certifications, and regulatory approvals.

Cabling and Connectivity Standards

Covers supported cables, connector pin-outs, and network standards compliance.

Support and Resources

Accessing Aruba Support

Provides contact information and procedures for obtaining technical support.

Product Information and Updates

Links for warranty information, software updates, and accessing documentation.

Related product manuals