To Next PageTo Next PageWhat to do if link light does not light when a cable is connected to HPE Switch?
If the link light doesn't illuminate when a cable is connected to your HPE Switch, check for loose or faulty connections. Ensure all connections are secure. If the issue persists, try using a different cable.
General| Model | HPE OfficeConnect 1920S Series |
|---|---|
| PoE+ Support | Yes (on select models) |
| Management | Web-based GUI, SNMP |
| Layer | Layer 2 |
| Mounting | Rack-mountable |
| Power Supply | Internal |
| Forwarding Rate | Up to 95.2 Mpps |
| Input Voltage | 100-240VAC |
| Power Consumption | Varies by model |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Latency | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Certifications | CE, FCC, RoHS |
| Ports | 8, 24, or 48 ports |
Details physical components and ports of the switch models.
Explains different types of network ports and their capabilities.
Describes the meaning of various status LEDs on the switch.
Provides safety warnings and cautions for switch installation.
Outlines the process for installing the switch.
Covers rack, wall, under-table, and horizontal surface mounting.
Guides through the first-time setup and web interface access.
Explains how to connect using the default IP address.
Offers common solutions for switch problems.
Explains how to interpret LED status for problem diagnosis.
Guides on resetting the switch to its default configuration.
Provides links and information for obtaining technical support.
Details physical dimensions, weight, voltage, and current.
Specifies cable types, distances, and connector types.
Lists compliance information for various regions.
