HPE Aruba 2930M 24SR User Manual

MF877-00 Page 1
Template Revision B, 18-Nov-2016
HPE instructions for this template are available at MF877-01
Product End-of-Life Disassembly Instructions
Product Category
: Networking
Marketing Name / Model
[List multiple models if applicable.]
Aruba 2930M 24SR PoE Class 6 1s Swch (R0M68A)
Name / Model #2
Name / Model #3
Name / Model #4
Name / Model #5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
Batteries
All types including standard alkaline and lithium
coin or button style batteries
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers

HPE Aruba 2930M 24SR Specifications

General

Model	HPE Aruba 2930M 24SR
Layer	Layer 3
PoE	No
Input Voltage	100-240VAC, 50/60 Hz
Operating Temperature	0°C to 45°C (32°F to 113°F)
Operating Humidity	15% to 95% non-condensing
Stacking	Yes, up to 8 switches
Management	SNMP
Memory and Processor	ARM Cortex A9 @ 1016 MHz
Dimensions	1.73 x 17.4 x 16 in (4.39 x 44.25 x 40.64 cm) (1U height)

Summary

Items Requiring Selective Treatment

Printed Circuit Boards

Components classified as Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) with a surface area greater than 10 sq cm.

Batteries

All types of batteries, including standard alkaline and lithium coin or button style batteries.

Mercury-Containing Components

Components that may contain mercury, such as lamps, display backlights, and switches.

Liquid Crystal Displays

LCDs with a surface area greater than 100 sq cm, including those with gas discharge lamps.

Capacitors and Condensers

Components like capacitors or condensers, especially electrolytic types over 2.5 cm in diameter or height.

Plastics with Flame Retardants

Plastics weighing over 25 grams that contain Brominated Flame Retardants.

Toner and Ink Components

Parts containing toner and ink, including liquids, semi-liquids, cartridges, print heads, and service stations.

Tools Required for Disassembly

Torque Driver and Bits

Standard torque driver and specific torque bits, such as T10 and T10-70 mm, for screw removal.

Product Disassembly Process Steps

Remove Chassis Cover and Fans

Steps involve removing screws, bulkhead blank, stacking blank, power supply, chassis cover, and fan assembly.

Disconnect Cables and PCA

Process includes unplugging FFC cables and removing PCA, LED board, and pushbuttons.

Remove Main PCA and Components

Steps to remove the main PCA, which includes LAVA2 24SR with POE+ & MECH, and associated screws.

Remove Insulator

Final step in the disassembly process involves removing the insulator component.