HPE Aruba 2930F

Power cords
Use one of the following power cords for an Aruba 2930F switch:
8121–1004Israel8121–0729Argentina
8121–1143Japan8121-0837Australia/New Zealand
8121–0738Switzerland8121-1071Brazil
8121–0737South Africa8121–0735Chile
8121-0964Taiwan8121–0943China
8121-0734Philippines/Thailand8121–0731Continental Europe/South
Korea
8121–0739UK/Hong Kong/Singapore/Malaysia8121–0733Denmark
8121-1141US/Canada/Mexico8121–0564India
Safety and compliance information
For important safety, environmental, and regulatory information, see Safety and Compliance
Information for Server, Storage, Power, Networking, and Rack Products, available at http://
www.hpe.com/support/Safety-Compliance-EnterpriseProducts.
Aruba 2930F Switch Safety and Regulatory Information
Aruba 2930F SwitchesCategory
32°F to 113°F (0°C to 45°C) up to 5000 FtEnvironmental
• Operating Temperature:
32°F to 104°F (0°C to 40°C) up to 10000 Ft
15% to 95% at 104°F (40°C) non-condensing
• Operating Relative Humidity:
–40°F to 158°F (–40°C to 70°C) up to 15000 ft
• Non-Operating/Storage Temperature:
15% to 95% at 149°F (65°C), non-condensing
• Non-Operating/Storage Relative Humidity:
3.0 km (10,000 ft)
• Maximum Operating Altitude:
4.6 km (15,000 ft)
• Maximum Non-Operating Altitude:
Side-to-SideAirflow direction
EN 60950-1:2006 +A11:2009 +A1:2010
+A12:2011+A2:2013
Safety-EU
IEC60950-1:2005 Ed.2; Am 1:2009+A2:2013Safety- World Wide
UL60950-1, CSA 22.2 No 60950-1North American
EN60850-1:2007 / IEC 60825-1: 2007 Class1Lasers
Class 1 Laser Products / Laser Klasse 1
EN 55022:2010, Class A
nl
EMC:
EN 55024:2010
nl
EN 6100–3–2:2006+A1:2009+A2:2009, Class A
nl
EN 61000–3–3:2008
nl
FCC CFR 47 Part 15:2010, Class A
EN 50581:2012RoHS:
Power cords 15