Need help?Do you have a question about the HPE FlexFabric 5710 Series and is the answer not in the manual?
General| Model | HPE FlexFabric 5710 Series |
|---|---|
| Power Supply | AC or DC |
| Operating Temperature | 0°C to 45°C |
| Routing Protocol | OSPF, BGP, RIP |
| Input Voltage | 100-240V AC |
| Operating Humidity | 10% to 90% (non-condensing) |
| Jumbo Frame Support | Up to 9216 bytes |
| Management | CLI, SNMP |
Essential safety guidelines to prevent equipment damage and personal injury during installation.
Conditions and checks for the installation site, including clearance, rack, and environment.
Guidelines for temperature, humidity, and cleanliness to ensure optimal switch operation.
Measures to prevent EMI, laser safety, and required installation tools for the switch.
List of required accessories for installing the HPE FlexFabric 5710 switch series.
Step-by-step guide for rack-mounting the switch, including rails and brackets.
Instructions for installing and removing fan trays from the switch chassis.
Procedures for installing and removing power supply units from the switch.
Instructions for connecting AC and DC power cords to the switch power supplies.
Checks to perform after installation to ensure correct setup and stability.
Steps to set up the environment for accessing the switch via console or USB.
Required terminal settings and verification steps before powering on the switch.
Details on connecting the serial console cable and USB mini console cable.
Visual representation of the steps involved in setting up an IRF fabric.
Planning considerations for IRF fabric size, site, topology, and member IDs.
Schemes for connecting switches in a ring topology, both in-rack and ToR.
Steps for basic IRF configuration and verifying the established IRF fabric.
Symptoms and solutions for power supply failures in the switch.
Symptoms and solutions for fan tray failures and alarms.
Troubleshooting for no display or garbled display on the configuration terminal.
Visual diagrams of the front and rear panels of various switch models.
Comprehensive technical specifications for the HPE FlexFabric 5710 switch series.
Compatibility of Field Replaceable Units (FRUs) like power supplies and fan trays.
Detailed specifications for various power supply models used with the switches.
Specifications for console and management Ethernet ports on the switch.
Details on SFP+, QSFP+, QSFP28 ports, including transceivers and cables.
Descriptions of LEDs for system status, ports, and fan trays.
Information on airflow direction for fan trays to ensure proper heat dissipation.
Explanation of command, GUI, and symbol conventions used in the documentation.
Definitions of icons used to represent network devices and connections.
How to contact HPE support, access documentation, and download software updates.
Links to relevant HPE websites and information on remote support services.
To Next Page
