HPE FlexFabric 5710 Series User Manual

21
• The correct power source is used.
• The power cords are correctly connected.
• If part of the network cable for a port is routed outdoors, verify that a network port lightning
protector is used for the port.
• If a power line is routed from outdoors, verify that a surge protected power strip is used for the
switch.

HPE FlexFabric 5710 Series Specifications

General

Model	HPE FlexFabric 5710 Series
Power Supply	AC or DC
Operating Temperature	0°C to 45°C
Routing Protocol	OSPF, BGP, RIP
Input Voltage	100-240V AC
Operating Humidity	10% to 90% (non-condensing)
Jumbo Frame Support	Up to 9216 bytes
Management	CLI, SNMP