48
Item Specification
Functions and services Software upgrade and network management
Table 17 FE SFP transceiver modules
Product
code
HPE
description
Central
wavelength
(nm)
Connector
Fiber type and
diameter (µm)
Max
transmission
distance
JD102B
HPE X115 100M
SFP LC FX
Transceiver
1310 LC
Multi-mode, 50/125
2 km (1.24 miles)
Multi-mode, 62.5/125
JD120B
HPE X110 100M
SFP LC LX
Transceiver
1310 LC Single-mode, 9/125 15 km (9.32 miles)
USB port
The switch has one OHC-compliant USB2.0 port that can upload and download data at a rate up to
480 Mbps. You can use this USB port to access the file system on the Flash of the switch, for
example, to upload or download application and configuration files.
NOTE:
USB devices from different manufacturers vary in compatibilities and drivers. Hewlett Packard
Enterprise does not guarantee the correct operation of all USB devices on the switch. If a USB
device fails to operate on the switch, replace it with one from another manufacturer.
SFP+ port
The HPE 5710-54HF and HPE 5710-30HF switches provide SFP+ ports. You can install Gigabit SFP
transceiver modules in Table 18, 10-Gig
abit SFP+ transceiver modules in Table 19, and 10-Gigabit
SFP+ cables in Table 20 in
the SFP+ ports as needed. Ports 29 to 36 on the front panel of the HPE
5710-54HF switch do not support Gigabit SFP modules.
Table 18 Gigabit SFP transceiver modules available for the SFP+ ports
Product
code
HPE
description
Central
wavelength
(nm)
Connec
tor
Cable/Fiber
type and
diameter
(µm)
Modal
bandwidth
(MHz × km)
Max
transmission
distance
JD089B
HPE X120 1G
SFP RJ45 T
Transceiver
N/A RJ-45
Category-5
twisted pair
N/A
100 m (328.08
ft)
JD118B
HPE X120 1G
SFP LC SX
Transceiver
850 LC
Multi-mode,
50/125
500
550 m (1804.46
ft)
400
500 m (1640.42
ft)
Multi-mode,
62.5/125
200
275 m (902.23
ft)
160
220 m (721.78
ft)
To Next Page
Loading...
Need help?
General
