31 Riser cardGuide post
2 4Groove Connector
d With the riser cards and connectors properly aligned, press down on the top of the PCIe cage to seat the riser cards
in their connectors.
e Press down on the fastener and turn the fastener tab one half turn (180°) clockwise to secure the PCIe cage.
7 Move the OCP card, if present, from the failed controller to the replacement controller.
a Remove the OCP card from the failed controller.
Replace a Controller 9
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
To Next Page
Loading...
