To Next PageTo Next Page
Need help?Do you have a question about the HPE StoreOnce 3100 and is the answer not in the manual?
General| Model | HPE StoreOnce 3100 |
|---|---|
| Category | Storage |
| Replication | Yes |
| Warranty | 3 Years |
| Connectivity | 1 GbE |
| Form Factor | 2U |
| Supported Protocols | VTL, OST |
| Power Supply | Dual redundant power supplies |
| Operating Temperature | 10 to 35°C (50 to 95°F) |
Explains the guide's two sections: task-based configuration and reference information.
Provides a checklist of initial configuration steps and their corresponding sections.
Details SAS cabling requirements and diagrams for the 5500 System.
Describes the standard installation scenario for the 5500 System's disk enclosure.
Steps to power on the 5500 System, including cable checks and LED status.
Instructions for powering on other StoreOnce models and checking connections.
Information on default iLO credentials and best practices for changing them.
Procedure for configuring iLO4 settings via the local console or DHCP.
Steps to perform initial network setup, including using the 'net set address' script.
Details on licenses for adding storage capacity to the 5500 System.
Explains licenses factory-installed with base systems or capacity upgrades.
Information on licenses for expanding capacity on 3500 and 5100 models.
Procedure to configure the appliance's time zone via the GUI.
Steps to configure NTP servers for time synchronization using the GUI.
Describes the two default user roles (Admin, Operator) and their permissions.
Step-by-step guide to adding new local user accounts via the GUI.
Instructions on how to modify passwords and roles for existing local users.
Overview of the email setup page for configuring event notifications.
Details on setting up SMTP server, port, sender, and reply-to addresses.
Procedure to send a test email to verify the configuration.
Explains the role of MIBs for network management and how to obtain them.
Steps to enable and configure the SNMP agent settings through the GUI.
Explains the need for SSL certificates for secure GUI access.
Provides instructions to generate a self-signed SSL certificate for the appliance.
Details on storage expansion for the 3500 series, noting limitations.
How to check installed capacity upgrade licenses via the GUI.
Procedure to scan and view the configured and unconfigured storage.
Steps to verify the current software version and check for updates.
Process for checking and applying firmware updates to system components.
Describes the basic network setup with LAN port 1 and its implications.
Overview of creating custom network configurations using GUI or CLI.
Explains the fields used when defining network port sets.
Details the fields for creating new network subnets.
Steps to validate and activate the created network configuration.
Procedures for backing up configuration files and encryption keystore.
How to run a system self-test using the CLI for diagnostics.
Requirements for client server drivers (LTO Tape, Medium Changer) for VTL.
Explanation of iSCSI for VTL and requirements for Windows/Linux.
Overview of optional PCIe cards for 10 GbE and Fibre Channel.
Diagrams and labels for the 5500 System server's front and rear panels.
Details on storage expansion for the 5100 System, including Capacity Upgrade Kits.
Illustrates cabling for expanded storage on the 5100 System.
Information on how PCIe cards are installed and configured at the time of product shipment.
Diagrams showing port numbering for 10 GbE cards.
How to view the status, license, and validation of installed optional hardware controllers.
General tasks and considerations for network configuration.
Details on the four 1 GbE ports and their use for network configuration.
Information on 10 GbE connectivity requiring optional PCIe cards.
Explains the three main components: DNS servers, Port Sets, and Subnets.
Configuration details for primary and backup DNS servers.
Defines port sets for physical network ports, bonding, and VLANs.
Details on supported bonding modes (Active/Backup, LACP, Load Balancing) for network ports.
Guidelines for configuring VLAN subnets, tag IDs, and their limitations.
Requirements for Fibre Channel connectivity, noting it's not supported on 3100.
Information on supported Fibre Channel topologies (switched fabric, direct attach).
Explains the necessity and benefits of Fibre Channel zoning in SAN environments.
How to configure FC settings for StoreOnce Catalyst stores.
Configuration of FC settings for VTL libraries, including port speed and topology.
Links and information for accessing HPE support documentation and services.
Procedures for downloading software updates and subscribing to alerts.
Details on remote support features and HPE Proactive Care services.
Where to find warranty details for HPE products.
Information on chemical substances compliance, RoHS, and REACH.
How to provide feedback for improving the documentation.
Local representative information and markings for Russia, Belarus, and Kazakhstan.
Information regarding compliance with Ukraine's technical regulations on hazardous substances.
