To Next PageTo Next Page
Need help?Do you have a question about the HPE StoreEver MSL2024 and is the answer not in the manual?
General| Number of Slots | 24 |
|---|---|
| Encryption | Yes |
| Product Type | Tape Library |
| Number of Drives | 1 or 2 |
| Interface | SAS |
| Maximum Capacity | 720 TB (compressed) |
| Drive Type | LTO-6, LTO-7, LTO-8 |
| Weight | 22.7 kg |
| Power Supply | 100-240 VAC, 50-60 Hz |
| Operating Temperature | 10°C to 35°C |
| Non-operating Temperature | -40°C to 65°C |
| Operating Humidity | 20% to 80% (non-condensing) |
| Non-operating Humidity | 10% to 90% non-condensing |
| Dimensions | 21.3 in (D) x 19.0 in (W) x 8.7 in (H) / 54.1 cm (D) x 48.3 cm (W) x 22.2 cm (H) |
Provides information necessary to install the HPE StoreEver MSL2024 Tape Library for system administrators.
Contains copyright statements, warranty disclaimers, and software licensing information.
Lists trademarks of various companies used within the document.
Provides links to warranty details and safety/compliance information for HPE products.
Details the components and indicators on the front panel of the tape library.
Identifies ports and connectors on the back panel of the MSL2024 tape library.
Illustrates back panel connections for various Fibre Channel and SAS tape drive models.
Describes the Operator Control Panel (OCP) and Remote Management Interface (RMI).
Specifies criteria for selecting a suitable location for the tape library in a rack.
Details Fibre Channel connectivity requirements, including HBAs, switches, and cables.
Outlines requirements for SAS connectivity, including HBAs, cables, and connectors.
Steps to prepare the host computer and install necessary hardware like HBAs.
Instructions for safely unpacking the tape library and verifying components.
Procedure for removing the shipping lock to enable library robotics operation.
Detailed steps for mounting the tape library securely into a server rack.
Guide on how to install tape drives into the available drive bays of the library.
Procedure for connecting Fibre Channel cables between the tape drive and the host.
Procedure for connecting SAS cables between the tape drive and the host.
Steps to safely power on the tape library and verify initial operation.
Procedure to locate the library's IP address when using DHCP.
Steps to configure IPv4 network settings using the Operator Control Panel (OCP).
Details the HPE Ultrium universal cleaning cartridge and its part number.
Lists supported LTO-4 data cartridges and their respective part numbers.
Lists supported LTO-5 data cartridges and their respective part numbers.
Lists supported LTO-6 data cartridges and their respective part numbers.
Lists supported LTO-7 data cartridges and their respective part numbers.
Lists supported LTO-8 data cartridges and their respective part numbers.
Guide on how to access product documentation and the user and service guide.
Provides links to HPE support, compatibility information, and tools like L&TT.
