To Next PageTo Next Page
Need help?Do you have a question about the HPE StoreEasy 1X60 Storage and is the answer not in the manual?
General| Storage Type | NAS |
|---|---|
| Storage Controller | HPE Smart Array P408i-a |
| Category | Storage |
| Supported Drives | SAS, SATA HDD |
| Form Factor | 2U Rack |
| RAID Levels | 0, 1, 5, 6, 10 |
| Protocols | FTP, HTTP, HTTPS, NFS |
Overview of topics covered in the guide.
Target users for the administrator guide.
Definitions of commonly used terms.
Lists the HPE StoreEasy 1X60 Storage models covered.
Core value proposition of HPE StoreEasy 1X60 Storage systems.
Step-by-step instructions for setting up the storage system.
Items required before system setup.
Procedures for physically installing the system in a rack.
Guidelines for connecting cables to the system.
Steps to power on the storage system.
Final steps for completing the system installation.
How to start the system configuration wizard.
Tasks performed during initial system setup via ICT.
Overview of system components and their roles.
Configuration and use of Active Directory for authentication.
Managing local user accounts and groups for access.
Introduction to storage pools and their management.
Steps to create storage pools using the management console.
Procedures for deleting storage pools.
How to add new disks to existing storage pools.
Steps to replace failed hard drives.
Details on volumes and their management.
Steps for creating new volumes.
Procedures for deleting existing volumes.
Setting permissions for files and folders.
Introduction to file sharing and its management.
Configuration and management of SMB file shares.
Configuration and management of NFS file shares.
Overview of directory quotas and their purpose.
Creating and managing quota templates.
Steps to create a point-in-time backup copy.
Procedures for removing old snapshots.
Introduction to networking configuration.
Configuring and managing network interfaces.
Creating and managing network teams for increased bandwidth and fault tolerance.
Information about the COA for support.
How storage growth can occur.
Procedures for recovering the system.
Using Event Viewer for troubleshooting.
Guidelines for system maintenance and upgrades.
Identifies front and rear panel components and their labels.
Explains front panel status indicators and controls.
Identifies rear panel components and their status indicators.
Identifies major components located on the server's system board.
Details various drive types (SAS/SATA, NVMe, uFF) and their status LEDs.
Explains the logic for numbering drive bays based on connections.
Details power supply units and fan configurations for optimal operation.
Step-by-step guides for installing various hardware options like memory, controllers, TPMs, etc.
Procedures for installing a DIMM.
Details on the HPE 16GB NVDIMM memory module.
Procedures for installing an NVDIMM.
Steps to configure the server for NVDIMM use.
Information on HPE Scalable Persistent Memory.
Steps to install a storage controller card.
Introduction to the HPE TPM 2.0 Gen10 option.
Guidelines for installing or replacing a TPM.
Steps to install and enable the TPM 2.0 Gen10 Kit.
How to enable TPM as TPM 2.0 in BIOS.
How to enable TPM as TPM 1.2 in BIOS.
Monitors server hardware and system configuration changes.
Remote server management processor for monitoring and control.
Tool for configuring HPE Smart Array SR controllers.
List of general HPE websites for information and resources.
How to access support and documentation.
How to find and download software updates.
Information on HPE's customer self-repair program.
Availability and benefits of remote support services.
How to view product warranty and compliance documents.
Information on product regulatory compliance.
How to provide feedback on the documentation.
Lists installed server roles and features.
