To Next PageTo Next Page
Need help?Do you have a question about the HPE Synergy 480 Gen10 and is the answer not in the manual?
Details for replacing the access panel.
Details for replacing SFF drive blank parts.
Details for replacing DIMM baffle spare parts.
Details for replacing front panel/drive cage assembly parts.
Details for replacing the rear heatsink blank spare part.
Details for replacing the compute module end cap spare part.
Details for replacing the mezzanine assembly spare part.
Identifies mechanical components of the mezzanine graphics assembly.
Identifies mechanical components of the Multi-MXM graphics expansion module.
Identifies mechanical components of the PCIe graphics expansion module.
Details for replacing the system battery.
Details for replacing DIMM modules.
Details for replacing the HPE 16GB NVDIMM spare part.
Details for replacing HPE Persistent Memory modules.
Details for replacing processor heatsink spare parts.
Details for replacing system board spare parts.
Details for replacing drive backplane spare parts.
Details for replacing First Gen Intel Xeon Scalable Processors.
Details for replacing Second Gen Intel Xeon Scalable Processors.
Details for replacing the M.2 SSD adapter board.
Details for replacing M.2 flash drive spare parts.
Details for replacing the HPE TPM 2.0 spare part.
Details for replacing the HPE Smart Storage Battery.
Details for replacing the HPE Smart Storage Hybrid Capacitor.
Details for replacing mezzanine option cards.
Details for replacing the HPE Synergy Internal SATA board.
Details for various drive types including SAS, SATA, and NVMe SSDs.
Details for replacing storage controller spare parts.
Lists required tools and essential safety precautions for performing procedures.
Covers preparation, powering down, and removal/installation of the graphics expansion module.
Steps to replace Multi-MXM graphics expansion and its sub-components.
Steps to replace PCIe graphics expansion and its sub-components.
Procedures for replacing drives, adapters, boards, and other compute module parts.
Procedures for replacing storage controllers, mezzanine cards, and other options.
Identifies and describes front panel components.
Identifies and describes front panel LEDs and buttons.
Explains drive numbering schemes for different drive types.
Defines LEDs for hot-plug drives.
Identifies SFF flash adapter components and defines their LEDs.
Defines LEDs for NVMe SSDs.
Identifies and describes system board components.
Details the function of system maintenance switches.
Defines mezzanine connectors and their supported card types.
Illustrates DIMM slot numbering and placement.
Explains how to interpret DIMM labels.
Details how to identify NVDIMMs and their characteristics.
Identifies NVDIMM LEDs and their states.
Identifies components of the Enterprise Midline USB device.
Identifies components of the Multi-MXM graphics expansion module.
Identifies components of the PCIe graphics expansion module.
Guides on identifying HPE Synergy hardware components and LEDs.
Provides information on cabling configurations and requirements.
Illustrates cabling for the energy pack option.
Illustrates cabling for the P416ie-m Smart Array Controller.
Details environmental operating and non-operating specifications.
Details physical specifications for the compute module.
Details physical specifications for the Multi-MXM graphics expansion module.
Details physical specifications for the PCIe graphics expansion module.
Information on updating firmware and drivers for HPE Synergy.
Guides on how to access HPE support services and information.
Information on how to access and download software updates.
Information on available remote support services.
Links to view warranty information for HPE products.
General