HPE Synergy 480 Gen10

System maintenance switch
Position Default Function
S1
1
O
O = HPE iLO security is enabled.
On = HPE iLO security is disabled.
S2 O Reserved
S3 O Reserved
S4 O Reserved
S5* O
O = Power-on password is enabled.
On = Power-on password is disabled.
S6* O
O = No function
On = Reset configuration
S7 O Reserved
S8 O Reserved
S9
2
O
Reserved
On = Graphics expansion is enabled.
O = Graphics expansion is disabled.
S10 O Reserved
S11 O Reserved
S12 O Reserved
1
To access redundant ROM, set S1, S5 and S6 to On.
2
Set swtich S9 to On for GPU expansion options
Component identification 102