HPE Synergy 480 Gen10

To replace the component, reverse the removal procedure.
NOTE: To prevent the risk of overheating, verify that both PCIe card cages contain either a PCIe card or a filler before
operating the server.
More information
Powering down the graphics expansion module
Removing the graphics expansion module from the frame
Removing the access panel
HPE Trusted Platform Module 2.0 Gen10 Option
The HPE Trusted Platform Module 20 Gen10 Option is not a customer-removable part.
CAUTION: If the TPM is removed from the original graphics expansion module and powered up on a
dierent graphics
expansion module, data stored in the TPM including keys will be erased.
If you suspect a TPM board failure, leave the TPM installed and remove the system board. Contact a authorized service
provider for a replacement system board and TPM board.
Dual 8Gb microSD Enterprise Midline USB device
This graphics expansion module supports the installation of the Dual 8Gb microSD Enterprise Midline USB device on the
graphics expansion module internal USB connector.
Removal and replacement procedures
92