Front panel LEDs and buttons
Item Description Status
1 Graphics module power
button and LED
Solid Green = System on
Amber = System in standby
O = No power present
2 UID LED
Solid blue = Activated
Flashing blue (1 Hz/cycle per sec) = Remote management or firmware
upgrade in progress
O = Deactivated
3 Health Status LED
Solid green = Normal
Flashing green (1 Hz/cycle per sec) = iLO is rebooting.
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical
Table Continued
Component identification 96
To Next Page
Loading...
