Modifying Quota Templates
The Quota Templates can be modified using:
Modifying Quota Templates using HPE StoreEasy management console
Modifying Quota Templates Using HPE StoreEasy management console
The user can modify the existing template as per their requirements. This option allows you to modify the
quota type, increase or decrease the quota limit, modify the threshold alert limits and notifications.
To edit a quota template, perform the following:
1. Select Settings > Quota Templates from the left navigation menu.
2. Click any of the existing quota templates that you choose to modify from the Quota Templates page and
click edit icon (
) on the top right-side of the page.
3. Select either Limit capacity or Monitor capacity quota type.
Limit Capacity creates the hard quota and Monitor Capacity creates the soft quota.
4. Click + or - icon in the Limit section to increase or decrease the quota limit for the folder or a share.
5. Select the appropriate units in the Unit section drop-down menu. The available units are MiB, GiB, TiB,
PiB.
6. Click + icon in the Thresholds field to modify the warning and alert limits that is set for the system
utilization and performance and to modify the type of notifications generated when the maximum threshold
is reached.
NOTE:
The maximum threshold is 250 percent.
7. Select any of the following options from the Trigger Actions section to notify the user when the maximum
threshold limit is reached:
• Send Email: An email message will be sent to the user when the folder/Quota/Share reaches the
maximum limit. You can use the email template provided in the Send email section.
• Log Event: An event is logged when the maximum threshold limit is reached.
• Run Command:
• Create Report
8. Select any of the following options in the Template section:
• Do not update derived Quotas
• Only update Quotas that match the template
• Update all derived Quotas
9. Click OK to update the quota template.
72 Modifying Quota Templates
To Next Page
Loading...
