HPE StoreEasy 1X60 Storage

• ICT creates storage pools and virtual disks.
• ICT enables software updates and enhancements directly from Windows updates.
• Set up optional data protection solutions on HPE StoreEasy 1X60 Storage with cloud-based data backup
by replicating data using Vision Solutions Double-Take Availability. Both of these data protection solutions
require separate licensing, but are available to use for a limited time through a free trial license.
Initial system configuration using ICT
Following are the Initial system configurations tasks included in ICT:
• System Settings
• Networking
• Notifications
• Protection
• StoreEasy management console
System Settings
This task group enables you to configure the system settings. The following aspects are included in this
group:
• Administrator password
• Time zone
Administrator password
Set local administrator password: This enables you to change the administrator user password. The default
password is the password that you entered during the initial setup of the server. To change the password,
enter the new password in the New password and Confirm password fields and click OK.
IMPORTANT:
HPE cannot assist with lost passwords.
Time zone
Set time zone: Enables you to change the date and time settings. You can change the time zone, date and
time, and synchronize the date and time with an Internet time server.
Networking
This task group enables you to set the network IP and domain of HPE StoreEasy 1X60 Storage.
The following tasks are included in this group:
• Configure networking
• Computer name and domain
Initial system configuration using ICT 23