Usage % more than lowest threshold % but less than
100%
Warning
Actual % equal to or more than 100% Critical
Thresholds not set on Quota Unknown
Quota Templates
Quota templates are templates that users can create. You can specify different options for creating a Quota
template. When you are applying quota on a path, you can choose one of these templates.
A quota template defines a space limit, type of quota (hard or soft), set of notifications generated
automatically when quota usage reaches the defined threshold levels.
NOTE:
The Quotas can be edited independent of the Quota template.
Creating Quota Templates
Quota Templates can be created by using:
Creating Quota Templates using HPE StoreEasy management console
Creating Quota Templates Using HPE StoreEasy management console
To create a Quota template, perform the following:
1. Select Settings > Quota Templates from the left navigation menu.
2. Click + icon on top right-side of the Quota Templates page.
3. Select either of the following Quota type of from the Quota Type section:
• Limit capacity: Reusable hard Quota Template.
• Monitor capacity: Soft Quota Template
4. Click + or - icon in the Limit (MiB) section to increase or decrease the quota limit for the folder or a
share.
5. Select the appropriate units in the Units drop-down menu. The available units are MiB, GiB, TiB, PiB.
6. Click + icon in the Thresholds section to add threshold (warning and alert limits for the system utilization
and performance).
7. Click + or - icon to set the threshold limit.
NOTE:
The maximum threshold is 250 percent.
8. Select any of the following options from the Trigger Actions section to notify the user when the
maximum threshold limit is reached:
70 Quota Templates
To Next Page
Loading...
