4. Enter the user-friendly name for the Network Interface in the Name field in the Edit Network Interfaces
page.
5. Click edit ( ) in the IP Settings section and choose any of the following modes:
• Use DHCP
• Manually assign IP and DNS address
6. Click OK and click Apply to save the changes.
The state of the edit task performed will appear on the top of the Network Interface page as shown in the
following image.
Network Teams
Network teaming is used to increase available bandwidth, load balancing, and improve fault tolerance. The
maximum number of teams that you can create is equal to the number of physical network interfaces on the
system.
Viewing Network Teams
The Network Teams page displays the list of available network teams in the system, their mode of teaming,
load balancing, and number of available team members.
You can access the Network Team by clicking Settings > Networking > Network Teams from the left
navigation menu in the management console of the HPE StoreEasy.
The following user icons are available in the Network Teams page:
Icon Function Description
Search Allows the user to search specific Network Team by their name.
Add Click on this icon to create a new Network Team where you can specify the
mode of teaming, load balancing and you can add team members.
Table Continued
Network Teams 79
To Next Page
Loading...
