HPE StoreEver MSL2024

4. Replace the magazines in the library.
5. Repeat for the right magazines. The right magazines do not have a mailslot.
Verifying the connection
Procedure
1. Install the application software and/or drivers that are compatible with the library and tape drive.
Backup software packages might require additional software or licensing to communicate with the
robotics.
For software compatibility information, see the DAPR compatibility matrix at: http://hpe.com/storage/
DAPRcompatibility
2. Verify the connection between the library and the host:
a. Install the HPE Library & Tape Tools Utility onto the host computer. This utility verifies that the unit
is connected and communicating with the host server. It also verifies that the device is functioning
and provides diagnostic information.
To verify your connections, click the HPE L&TT Install Check icon in the HPE Library and Tape
Tools program group in Windows. L&TT is available without cost at: http://www.hpe.com/support/
TapeTools
b. Confirm that the host server operating system recognizes the library.
In Windows, look for tape drives and media changers in the Device Manager.
Verifying the installation
Procedure
1. Determine the firmware revision currently installed on the library.
22 Verifying the connection