Need help?Do you have a question about the HPE Integrity rx2800 i6 and is the answer not in the manual?
General| Product Type | Server |
|---|---|
| Form Factor | Rack-mountable |
| Memory Type | DDR3 |
| Memory Slots | 24 |
| Storage Options | SAS SSD |
| Hard Drive Bays | 8 |
| Network Interface | 2 x 1GbE (optional 10GbE) |
| Operating System Support | Linux, Windows Server |
Critical safety instructions and warnings for preventing injury and equipment damage during installation procedures.
Precautions to prevent system damage from static electricity discharge.
Outlines the step-by-step procedure for installing the server, including a completion checklist.
Instructions for installing the server into HPE and non-HPE racks.
Guidance on installing the server using an optional pedestal mount.
Details the procedure for attaching the top and bottom components of the pedestal kit to the server.
Instructions for attaching the front bezel cover to the server after pedestal installation.
Steps for attaching the side pieces of the pedestal kit, ensuring ventilation alignment.
Instructions on how to install the pedestal feet into the bottom piece of the pedestal kit.
Explains how to connect AC power to the server and describes redundancy options.
Describes the different power states the server can be in: standby, full power, and off.
Procedure for connecting power cords to the server and an AC outlet.
Instructions for connecting the server to a network using its LAN ports.
Guidance on initial system setup, including iLO 3 MP and a setup checklist.
How to access UEFI or the operating system via the iLO MP.
Details how to navigate to the UEFI Front Page from the iLO MP console.
Information on how to save UEFI configuration settings for future use.
Covers procedures for booting and installing the operating system on the server.
Steps for booting the server when the OS is already installed.
Describes installation options when the OS is not yet installed on the server.
Guidance on logging into the server once the OS is installed.
Methods for powering the server on to full power from standby mode.
Detailed steps to power on the server using the iLO 3 MP remote management interface.
Instructions for powering on the server using the physical power button.
General overview of powering off the server.
Steps to power off the server remotely using the iLO 3 MP.
Instructions for powering off the server using the physical power button.
Guide on using the SUM utility to deploy firmware updates to the server.
How to contact HPE for live assistance and access support services and documentation.
Information on downloading software updates and subscribing to alerts from HPE.
Details about HPE's customer self-repair program for parts.
Information on the benefits and setup of HPE's remote support and proactive care services.
Location to find warranty information and related safety and compliance documents.
Information on regulatory compliance, including REACH and RoHS data.
How to provide feedback to improve the documentation.
To Next Page