HPE R/T3000 G5 User Manual

MF877-00 Page 1
Template Revision A
HPE instructions for this template are available at MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Other Products
Marketing Name / Model
[List multiple models if applicable.]
HPE R/T3000 G5 HV INTL UPS
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic
instructions for the disassembly of HPE products to remove components and materials requiring selective treatment,
as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in
product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
4
Batteries
All types including standard alkaline and lithium
coin or button style batteries
6
Mercury-containing components
For example, mercury in lamps, display
backlights, scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with
gas discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
3
External electrical cables and cords
0
Gas Discharge Lamps
0
Plastics containing Brominated Flame
Retardants weighing > 25 grams (not including
PCBs or PCAs already listed as a separate item
above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and
toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
All manuals and user guides at all-guides.com

HPE R/T3000 G5 Specifications

General

Form Factor	Rack/Tower
Power Capacity	3000 VA / 2700 W
Output Voltage	230 V
Input Frequency	50/60 Hz
Output Frequency	50/60 Hz
Topology	Double Conversion Online
Waveform Type	Sine wave
Number of Outlets	8
Communication Ports	USB, Serial
SmartSlot	Yes
Management Software	HPE Power Protector
Battery Type	Sealed Lead-Acid (SLA)
Audible Alarm	Yes
Transfer Time	0 ms
Typical Recharge Time	3 hours
Battery Runtime	Varies with load
Operating Temperature	0 to 40°C
Operating Humidity	0 to 95% RH, non-condensing
Efficiency	Up to 98%

Summary

Items Requiring Selective Treatment

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

Components with a surface greater than 10 sq cm requiring selective treatment.

Batteries

All types of batteries, including alkaline and lithium coin or button styles.

Mercury-Containing Components

Components containing mercury, such as lamps and display backlights.

Liquid Crystal Displays (LCD)

LCDs with a surface greater than 100 sq cm, including gas discharge lamps.

Cathode Ray Tubes (CRT)

CRT components requiring selective treatment.

Capacitors/Condensers Containing PCB/PCT

Capacitors or condensers containing PCB/PCT.

Electrolytic Capacitors/Condensers

Electrolytic capacitors measuring over 2.5 cm in diameter or height.

External Electrical Cables and Cords

External electrical cables and cords requiring selective treatment.

Gas Discharge Lamps

Gas discharge lamps requiring selective treatment.

Plastics with Brominated Flame Retardants

Plastics weighing over 25 grams containing Brominated Flame Retardants.

Components with Toner and Ink

Parts containing toner, ink, liquids, semi-liquids, gel or paste.

Components with Asbestos

Components and waste containing asbestos.

Tools Required for Disassembly

Star Head Screw Driver

Star head screw driver, typically M3 size.

Cross Head Screw Driver

Cross head screw driver, typically M3 or M4 size.

Plastic Nipper

Plastic nipper tool, normal size.

Nut Driver

Nut driver tool, typically M4 size.

Electric Iron

Electric iron tool, normal size.

Product Disassembly Process Steps

Initial Panel and Battery Removal

Remove middle bezel, left panel, and battery door to access and remove the battery.

Top Cover and Right Panel Removal

Remove the top cover, disconnect LCD and fan cables, then remove the right panel ASSY.

Main PCBA and Rear Panel Removal

Disconnect cables, remove cable clips, loosen screws to remove the main PCBA and rear panel ASSY.

AVR, Slot Box, and I/O PCBA Removal

Disconnect cables, cut cable ties, loosen nuts to remove AVR, Slot box, COM PCBA, and I/O PCBA.