Need help?Do you have a question about the HPE R8Q72A and is the answer not in the manual?
General| Product Number | R8Q72A |
|---|---|
| Device Type | Switch |
| Power Supply | Internal Power Supply |
| PoE | Yes |
| PoE Budget | 370W |
| Switching Capacity | 176 Gbps |
| Operating Humidity | 10% to 90% non-condensing |
| Ports | 48 x 10/100/1000 ports |
| Form Factor | 1U Rack Mountable |
| Management | Web GUI, CLI, SNMP |
| MAC Address Table Size | 32K |
| Jumbo Frame Support | 9216 bytes |
| VLAN Support | Yes |
| Quality of Service (QoS) | Yes |
| Weight | 3.5 kg |
| Operating Temperature | 0°C to 45°C |
| Memory and Processor | 512 MB RAM, 16 MB Flash |
Step-by-step guide for installing the switches.
Important safety and installation best practices to follow before mounting.
Procedure to confirm the switch powers on and initializes properly.
Guidance on mounting the switch in various locations and orientations.
Basic configuration steps for initial setup.
Details on performing the initial configuration.
Steps for replacing a faulty fan module in 6200M switches.
Steps for replacing a power supply unit.
General advice and common issues to check first.
How to interpret front panel LED behavior for diagnostics.
Table of common problems and their solutions.
To Next Page