HPRT HD100 User Manual

HD100/HD130 User Manual
26
3.6.4 Print Self-test Page
The self-test checks the printer’s current settings, status and whether the printer has any
problems or not.
1.Printing Manually
1) Make sure the roll is loaded properly.
2) Make sure the top cover of the printer is closed properly. Then turn on the printer.
3) When the printer is ready, press the feed button continuously. When the indicator flashes
(green) once, loosen the button. Then the printer starts to print the self-test page.
2.Printing by Windows Driver Program
1) Install the Windows Driver program.
2) Set the “Interface” as the type you use.
3) Use the Windows Driver Program to print out the “Self-test page”.
4) Please refer to “Chapter 7 Seagull Windows Driver Instructions” for more detailed
information.
3.Printing by HPRT BarTender Ultralite Program
1) Install the HPRT BarTender Ultralite program.
2) Edit a new label and print it.
3) Please refer to “Chapter 8 BarTender Ultralite Instructions” for more detailed information.

HPRT HD100 Specifications

General

Brand	HPRT
Model	HD100
Category	Printer
Language	English