HPRT HT100 User Manual

HT100/HT130 User Manual
Rev.1.2
35
●Click “Parameter Setting”. User can set up the BT config, print type, paper mode and so on.
Click “Set”, and back to the main menu.
●Click “Model Print Test”, then printer starts to print models.
●Click “Restore Factory Settings”. Click “OK” to restore factory settings, and click “Cancel” to
cancel the command.
(4)Click “Quit”, then finish the settings.

HPRT HT100 Specifications

General

Brand	HPRT
Model	HT100
Category	Printer
Language	English