HPRT LPQ58 User Manual

LPQ58/80 User Manual
Rev 1.0 www.hprt.com
11
6. After entering protocol setting mode, it prints the following contents:（NOTE：The setting mode
is only available when you use label paper.）
Set protocol：
Protocol: TSPL
Users can change the protocol by pressing 【POWER】 button one time, and press 【FEED】 to
confirm the chosen protocol. After this setting, printer will automatically power off.
Optional protocol: TSPL, ESC/POS
NOTE: When receipt paper is used , only ESC/POS protocol is working.
When label paper is used, protocol type can be set to either ESC/POS or TSPL.
7.Power on ,then above settings will take effect.

HPRT LPQ58 Specifications

General

Brand	HPRT
Model	LPQ58
Category	Label Maker
Language	English