3.6.4 Print Self-test Page
The self-test checks the printer’s current settings, status and whether the printer has any
problems or not. Please confirm the following status. Firmware version, printer parameter
setting status, print quality and external equipment related settings information, etc. If there
are no problems with the printer, please check other devices or software. This function
operates independently of other devices or software.
1.Printing Manually
1) Make sure the roll is loaded properly.
2) Make sure the top cover of the printer is closed properly. Then turn on the printer.
3) When the printer is ready, keep press the feed button until the light (Blue) flash once,
then release the button to start to print the self-test page.
2.Printing by Windows Driver Program
1) Install the Windows Driver program.
2) Set the “Interface” as the type you use.
3) Use the Windows Driver Program to print out the “Self-test page”.
4) Please refer to “Chapter 7 Windows Driver Instructions” for more detailed information.
To Next Page
Loading...
Need help?
General
