POS Printer Wi-Fi Operation Manual
1. Manual Information
This Wi-Fi Operation Manual provides information on POS printer’s Wi-Fi settings.
We maintain ongoing efforts to enhance and upgrade the functions and quality of all our products. Product
specifications or user manual content may be changed without prior notice.
2. Instruction Before Wi-Fi Setting
1) Printers with the Wi-Fi module, when the printer is powered on, the power indicator is flashing. After 8-9
seconds when the printer is ready, the power indicator will remain constant light.
2) To set up on a web page or tool after connecting to Wi-Fi, you need to get printer IP information, which
can be obtained in the following two ways:
■ Press the FEED button of the printer without releasing, then press the power button to turn on the printer,
when the printer begins to print the self-test page, release the FEED button. Check the IP information in the
self-test page.
■ For TP808 (with built-in Wi-Fi module), Shortly press the power button of the printer 3 times, the
printer would print out the IP information automatically;
For other models of POS printers (with external Wi-Fi module), shortly press the Function/Reset Button
(at the interface board) for three times, and the printer would print out the IP information automatically.
3) The Wi-Fi parameters of the printer can be set on web page or the tool of the printer.
■ Set on web page
The following browsers are recommended: 360, IE and Firefox.
To Next Page
Loading...
Need help?
General
