10.0 Removing Numbers from Lists (INCOMING, OUT, and BLACKLIST)
10.1 Removing Phone Numbers from INCOMING List
To remove numbers from the INCOMING list of recent calls (T-Lock Call Blocker holds up to
100 records, 16 digits each), simply use the UP or DOWN buttons (◄ or ►) to browse list.
Then, press the REMOVE button to delete number from list (LCD
(3)
displays "DEL"). To remove
entire list of incoming call records, press the REMOVE button (gently) for more than 3
seconds.
10.2 Removing Phone Numbers from the BLACKLIST
To remove numbers from the BLACKLIST memory (up to 1,200 records), press the BLACKLIST
button, then use UP or DOWN buttons (◄ or ►) to browse list. Then, press the REMOVE
button to delete number from list (LCD
(3)
displays "DEL"). To remove entire list, press the
REMOVE button more than 3 seconds. NOTE: You will need to input pass code (default 0000)
followed by the REMOVE button when LCD displays "PASS-". This is a safety feature to prevent
deleting the list unintentionally.
10.3 Removing Incoming Area codes or Prefixes from BLACKLIST
Follow steps 1 & 2 above, then follow these additional steps:
Step 3. Use UP or DOWN buttons (◄ or ►) to browse list of blocked numbers
Step 4. When displaying the number you wish to remove, press REMOVE (LCD
(3)
displays
"DEL").
Step 5. When done hang up handset, and wait 15 seconds to exit programming mode.
Important: The area codes & prefixes manually added will not show when browsing the
BLACKLIST.
10.4 Browsing / Removing Phone Numbers from the OUT list
To remove numbers from the outgoing list of recent phone numbers (up to 50 records) press
the BLACKLIST button, then use the UP or DOWN buttons (◄ or ►) to browse list. Now, you
can press the REMOVE button to delete any phone number you wish (LCD displays
"SUCCEED"). To remove the entire list, press the REMOVE button more than 3 seconds.
11.0 BLACKLIST Operation
The T-Lock Call Blocker will automatically disconnect (off-hook and hang up the call) if the
To Next Page
Loading...
Need help?
General