Switching on
OperationisdonewiththeON/OFF-switchonthefrontsideoftheinverter.Inswitch-modeONthe
LEDcontrol“Power”illuminates.
Malfunctions
120/150/300 W
Ifthebatteryvoltagefallsbelow10.7V(12Vmodels)or21.4V(24Vmodels)theLEDturnsorange.
Thiswillalsohappenwhentheinverterisoverheating.
Theinverterswitchesoffautomaticallyincasethebatteryvoltagegoesdownto10V(for12Vmodels)
or 20 V (for 24 V models).
1. Ifthishappens,switchofftheinverter.
2. Ensurethattheinverterissufcientlyventilated.
3. Waitforapproximately5-10minutesandswitchontheinverteronly.
600/1000/1500/2000 W
Ifthebatteryvoltagefallsbelow10.7V(12Vmodels)or21.4V(24Vmodels)theLEDcontrol“OVER-
LOAD”illuminatesandanaudiblesignalisgiven.Theinverterswitchesoffautomaticallyincasethe
battery voltage goes down to 10 V (for 12 V models) or 20 V (for 24 V models).
Ifthedeviceoverheats,theinverterswitchesoff–the“OVERTEMP”LEDlightsup.
4. Ifthishappens,switchofftheinverter.
5. Ensurethattheinverterissufcientlyventilated.
6. Waitforapproximately5-10minutesandswitchontheinverteronly.
Whenoperatingtheinverteratahighloadforlengthyperiods,youhavetopayattentiontothevoltage
ofthebattery.Ifthevoltageisnotenough,pleasechargethebatteryimmediatelyorreplaceit.
Thereisamodularjackforremotecontrolsfor1500Wand2000Wonthefrontpanelandfor600W
(optional) and 1000 W on the bottom plate.
Specications:
Pure sine 120W slim line series
Rated input voltage 12 V DC 24 V DC
Constant output power 120 W
Maximuminputcurrent 15 A 7.5 A
Outputvoltage 230VAC+/-3%
Outputfrequency 50Hz
Outputwaveform Pure sine wave
Totalharmonicdistortion 3%
No load current <0.5 A <0.3 A
Inputvoltagerange 10V ~ 16.5V 20V ~ 33V
Low voltage shutdown 10 V 20 V
Efciencyupto 88%
Dimensions(LxWxH) 204x105x30mm
Weight 453 g
Safetycertication EN60950-1:
EMC
EN55022: Class B
EN55024:
EN61000-3-2:
EN61000-3-3:
E Mark